Electric heating cable tape is used for equipment heat insulation, according to the user's requirements, you can set the desired temperature, for example, the user needs to maintain the temperature of 30 degrees, then it can be set to 30 degrees, in the selection of the time can be accompanied by 30 degrees of electric underfloor heating cable models are more, so according to the actual needs of the scene to choose on it.

                          After the electric heating cable energized insulation, because the user does not understand there will be such a question, why the electric heating cable energized temperature is only a dozen degrees, it depends on what model you use, anti-freezing, as long as to ensure that the zero on the 5 degrees can be, so a dozen degrees is normal. But if you ask to maintain the temperature of 50, 60 degrees, the temperature is only a dozen degrees, then there is a problem, need to test to see what is the reason, first of all, we must look at the model is not the wrong choice, for example, choose the low-temperature type of electric underfloor heating cable, then the temperature is not up to 50, 60 degrees, this time to replace the electric heating trace cable model, there is a temperature controller set up the wrong temperature controller reset it! On the line, the above situation is not then, that is the installation of the problem, you can let the electric heating cable manufacturers and technicians to test to see, what is the installation of the problem.

                      For equipment accompanied by heat insulation, electric heating cable selection is still very important, although there are many models can meet the requirements of heat preservation, but to choose the economic, suitable electric heat tracing cable, the user does not understand the case, you can let know the electric underfloor heating cable aspects of technical selection, but also let the manufacturers direct selection.