Electric heat tracing system is used for antifreeze and heat preservation of pipelines, tanks and other equipment to keep the medium at a reasonable temperature to prevent process problems. After the installation of the electric heat tracing system is completed, regular inspection and maintenance is beneficial to the safe and reliable operation of the electric heat tracing system. However, the user does not know much about the aspects of daily maintenance. The following is a brief introduction:

       1. Check whether the electric heating cable has leakage, tripping, alarm, etc., and check whether it is running normally.

       2. Check whether the insulation layer of the electric heating cable is damaged. If there is damage, take care of it immediately.

       3. Check whether the installation position of the power box is correct, and check whether the junction box and the sealed terminal are sealed well.

       4. Check whether the heating of the electric heating cable is normal. If it is not normal, you need to find out what the cause is and deal with it in time.

       5. Check whether the thermal insulation layer of the electric heating cable is soaked in water or damaged. If so, it should be handled and maintained in time.

       The above is the introduction to the daily maintenance of the electric heating system. Doing a good job in the daily maintenance of the electric heating cable is the necessary preparation for the use of the electric heating cable. Timely handling of emergencies can avoid unnecessary losses.